MUTOH ValueJet VJ-1204 Operation Manual page 92

5 Panel setup menu
(2) Initial Change menu
Set up Initial Adjust Change.
Setup item
Init.
(3) Confirm Print menu
Perform Confirm Print.
Setup item
Feed Length
(4) Micro Print menu
Perform Micro Adjustment Print.
Setup item
Micro Print
Setting
50.0mm to <250.0mm> to
550.0mm
—
Setting
100mm to <250mm> to
500mm
—
Setting
Printing
—
VJ-1204 OPERATION MANUAL
Description
Set up Initial Adjust Change.
• [Enter] key: saves the setting and shifts to the
previous menu.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1.1.1.2 Dist.Adj menu
Description
Changes the length (feed length) of the media feed
direction for Confirm Print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on the operation panel and
initial adjust print starts.
After printing, the printer enters Normal.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1.1.1.2 Dist.Adj menu
Description
Prints the following PF pattern (micro adjustment) with
a focus on the micro adjustment value.
• Printing interval: ±1 pulse
• [Cancel] key: shifts to the previous menu.
Stops printing and returns to the previous menu if
printing is in progress.
5.1 Setup menu
5-8