Print Flow Chart - MUTOH ValueJet VJ-1204 Operation Manual

4 Handling the printer
4.1

Print flow chart

The following flow chart illustrates the procedure for drawing with the printer.
Refer to each section as required.
1. Create print data.
Create print data with application software.
2. Turn the power ON and set the media.
3. Set up printing conditions.
4. Perform the printing.
WARNING
• Do not store combustible materials on the platen while performing the heater
operation. It could lead to fire.
• Do not spill flammable liquid over the platen. This could lead to fire.
CAUTION
• Do not touch the media guide during printing. It is hot and may cause a burn.
• Do not touch the media feed slot, platen or media guide while heaters are operating.
They are hot and may cause a burn.
• Keep the work area well-ventilated. This prevents fire, and stops operators from
feeling sick from bad air.
NOTE
• Do not open the front cover during printing. If the front cover is opened, printing will be interrupted.
Printing restarts if you close the front cover. However, you are not guaranteed to have high print
quality.
3.4 Setting media
4.2 Media
4.3 Menu setups on the operation panel
4.4 Operating from the operation panel
VJ-1204 OPERATION MANUAL
↓
↓
↓
4-2