Head Cleaning - MUTOH ValueJet VJ-1204 Operation Manual

6 Maintenance
6.2.3

Head cleaning

If printed data is blurred or lacks part of it, clean the print head surface and nozzle (Head cleaning).
Follow the procedure below to perform Head cleaning.
NOTE
• When not using the printer for a long period (one week or more), perform Head cleaning once a
week.
If not performing Head cleaning, the print head is clogged. Doing so will preserve print quality.
• Remove media when cleaning.
Cleaning with media loaded may lead to contact between the print head and media.
1. Confirm that the operation panel is Normal.
2. Confirm that the media loading lever is returned to the front.
3. Press the [>] key on the operation panel to select the cleaning mode.
4. Press the [Cleaning] key on the operation panel for at least 2 seconds.
• Start Head cleaning.
• "Cleaning **%" is displayed on the operation panel.
• After Head cleaning is complete, the operation panel shifts to Normal.
VJ-1204 OPERATION MANUAL
6-20