6 Maintenance
(3) Replacing steps
Follow the steps below to replace the flushing-box sponges.
1. If the printer is turned ON, make sure the following.
•
Printing or other operations are not in progress.
•
The operation panel display is Normal.
2. Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
•
"Menu 1: Setup>" is displayed on the operation panel.
•
The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
•
"Set1: MediaType" is displayed on the operation panel.
VJ-1204 OPERATION MANUAL
6-12