Cleaning The Cleaning Wiper - MUTOH ValueJet VJ-1204 Operation Manual

VJ-1204 OPERATION MANUAL
NOTE
• If you fail to remove blurs or incompleteness of printing in one Head cleaning, perform Long cleaning.
• If blurs or lacking parts in printed media do not disappear with several times of Head cleaning,
refer to "7 Troubleshooting", and take appropriate measures.
6.2.4

Cleaning the cleaning wiper

This sub-section describes how to clean the cleaning wiper.
(1) Cleaning time
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
(2) Cleaning method
Follow the procedure below to clean the cleaning wiper.
NOTE
• Use the poly-knit wiper to clean the cleaning wiper.
For the poly-knit wiper, refer to "8.3 Options/Supply list".
1. If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu 1: Setup>" is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
6-21
6 Maintenance