Error Messages; Status Messages - MUTOH ValueJet VJ-1204 Operation Manual

VJ-1204 OPERATION MANUAL
7.2

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
7.2.1

Status messages

This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display
1 Ready to Print
2 Media End
3 Receiving
4 Converting
5 Printing
6 Warming Up
7 Cleaning **%
8 Ink Refill **%
9 Busy-Washing
10 Moving Origin Pos.
11 Confirm Position – >E
12 Remove Cartridges
13 ** Initializing **
14 ** Press 2sec. **
15 Insert CleaningCart.
16 Insert InkCartridges
Description
Standby (Media is loaded).
Standby (Media is not loaded).
Receiving data.
Analyzing data.
Under printing.
Warming up the heater.
Cleaning the head. Please wait a while.
Filling the ink. Please wait a while.
Cleaning the print head by cleaning fluid.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Press the [Enter] key.
Cleaning the print head.
Attach the cleaning cartridge.
Initializing the setting in the Initialization
menu. Please wait a while.
The [Cleaning] key or the [Nozzle Check]
key is pressed for less than 2 seconds. Press
the key for more than 2 seconds again.
Cleaning the print head.
Attach the cleaning cartridge.
Filling the ink.
Insert an ink cartridge.
7-9
7 Troubleshooting
Reference
—
3.4 Setting
media
—
—
—
—
6.2.3 Head
cleaning
3.3 Installing ink
cartridges
3.3 Installing ink
cartridges
5.1.8 Origin
menu
5.1.8 Origin
menu
5.1.17 Longstore
menu
5.1.19
Initialization menu
2.2.3 Operation
panel
3.3 Installing ink
cartridges
3.3 Installing ink
cartridges