Replacing Supports And Scroller; Replacing The Waste Fluid Bottle Assembly (Rockhopper Ii 2H) - MUTOH Rockhopper II series Maintenance Manual

4.11. REPLACING SUPPORTS AND SCROLLER

4.11.1. Replacing the waste fluid bottle assembly (Rockhopper II 2H)

Notes :
Step 1 :
Remove the waste fluid tube from the waste fluid bottle assembly.
1 = Waste fluid tube
Step 2 :
Replace the waste fluid bottle assembly.
Caution :
Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube
onto the printer or items close to the printer.
Step 3 :
Reinstall all parts in the opposite order of the removal procedure.
When replacing the waste fluid bottle assembly, be sure to perform following
operation to clear the counter. "High ink initialization" or " Cleaning initialization":
refer to "Counter Initialization Menu"
Rockhopper II series printers – Maintenance Manual
2 = Waste fluid bottle assembly
127 AP-74065, Rev. 1.2, 27/09/04