Ford 2002 Bantam Workshop Manual page 1189

412-03-14
REMOVAL AND INSTALLATION (CONTINUED)
E1257 EN
Air Conditioning
4. Remove the bulkhead extension.
• Remove the rubber seal.
• Unclip the cover of the central junction
box (CJB).
• Remove the single screw.
5. Remove the bulkhead extension
(continued).
1. Remove the bolts.
2. Unclip the connector.
6. Remove the bulkhead extension
(continued).
• Remove the single screw.
NOTE: Seal the evaporator and refrigerant lines
with plugs.
7. Disconnect the refrigerant lines.
NOTE: Plug the heat exchanger.
412-03-14
07/2001 2002 Bantam