Ford 2002 Bantam Workshop Manual page 1381

BACK TO CHAPTER INDEX
417-01-57
DIAGNOSIS AND TESTING (CONTINUED)
N16: CHECK THE GROUND CONNECTION OF REAR PARKING LAMP, RIGHT-HAND SIDE
N17: CHECK THE POWER SUPPLY OF LICENSE PLATE LAMP
N18: CHECK THE GROUND CONNECTION OF LICENSE PLATE LAMP
E9427 EN
CONDITIONS
1.
License plate
lamp C40a
1.
License plate
lamp C40b
Exterior Lighting
DETAILS/RESULTS/ACTIONS
1 Measure the resistance between rear lamp
assembly, right-hand side, connector C42,
circuit 31-LF24 (BK), harness side and ground.
• Is the resistance less than 2 ohms?
Yes
CHECK the rear lamp assembly, right-hand
side. If necessary INSTALL a new one.
TEST the system for normal operation.
No
REPAIR the open circuit(s) between rear
lamp assembly, right-hand side and ground
G3, by using the wiring diagrams. TEST the
system for normal operation.
2 Measure the voltage between License plate
lamp, connector C40a, circuit 29S-LF12
(OG/BK), harness side and ground.
• Is battery voltage indicated?
Yes
GO TO N18
No
REPAIR the open circuit(s) between splice
S10 and license plate lamp, by using the
wiring diagrams. TEST the system for nor-
mal operation.
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
CONTINUED
07/2001 2002 Bantam
417-01-57