Ford 2002 Bantam Workshop Manual page 1384

BACK TO CHAPTER INDEX
417-01-60
DIAGNOSIS AND TESTING (CONTINUED)
P4: CHECK THE POWER SUPPLY OF FUSE (S) F6 AND F7
E9427 EN
CONDITIONS
Exterior Lighting
DETAILS/RESULTS/ACTIONS
2 Measure the voltage between fuse F15 (5 A)
and ground.
• Is battery voltage indicated?
Yes
REPAIR the open circuit(s) between fuse
F15 and multifunction switch, by using the
wiring diagrams. TEST the system for
normal operation.
No
REPAIR the power supply of fuse F15, by
using the wiring diagrams. TEST the system
for normal operation.
1 Measure the resistance between multifunction
switch, connector C15a, pin 7, circuit 29S-DB7
(OG/YE), harness side and fuse F6 (5 A) or
fuse F7 (5A).
• Is the resistance less than 2 ohms?
Yes
CHECK the multifunction switch, according
to Component Testing attached to the wiring
diagrams. If necessary INSTALL a new one.
TEST the system for normal operation.
No
REPAIR the open circuit(s) between multi-
function switch and fuse(s) F6 and F7, by
using the wiring diagrams. TEST the system
for normal operation.
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
417-01-60
CONTINUED
07/2001 2002 Bantam