Ford 2002 Bantam Workshop Manual page 1212

412-03-37
REMOVAL AND INSTALLATION
E5918 EN
Air Conditioning
NOTE: Seal the refrigerant line and the a
lator/dehydrator with plugs.
9. Disconnect the refrigerant line at the
accumulator/dehydrator.
Installation
NOTE: Tightening torques. For additional in-
formation,
refer to Section 412-03. Specifications
NOTE: Before connecting the refrigerant lines,
fit them with new O-rings. Coat the new O-rings
with refrigerant oil before fitting them.
1. Refit the components in reverse order.
2. Evacuate and refill the air conditioning
system. For additional information,
refer to Section 412-03.
3. Standard finishing operations.
• Connect the battery negative lead.
• Remove the protective covers.
• Enter the radio keycode.
• Reprogram the preset radio stations.
• Reset the clock.
• Road test the vehicle to collect data for
the PCM.
4. Check the operation of the air conditioning
system.
412-03-37
ccumu-
07/2001 2002 Bantam