The Charging System Warning Indicator Stays On - Ford 2002 Bantam Workshop Manual

BACK TO CHAPTER INDEX
414-00-5
DIAGNOSIS AND TESTING (CONTINUED)
Pinpoint Tests
PINPOINT TEST A: THE CHARGING SYSTEM WARNING INDICATOR STAYS ON
A1:
A2: CHECK CIRCUIT 31 (BK)
1.
A3: CHECK CIRCUIT 64 BA9 (BU-BK)
Instrument clus-
E1297 EN
Charging System — General Information
CONDITIONS
2.
Generator (C303a)
1. 2.
Heated windshield
ter (C44b) relay
DETAILS/RESULTS/ACTIONS
1 Carry out a No-Load Component Test.
Refer to the procedure in this section.
• Is there an increase in voltage?
Yes
GO TO A2
No
GO TO A4
3.
C1
4 Measure the resistance between the generator
connector C303a pin 1, circuit 31 (BK) and
ground.
• Is the resistance greater than 10,000 ohms?
Yes
GO TO A3
No
REPAIR circuit 31 (BK).
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
CONTINUED
07/2001 2002 Bantam
414-00-5