Ford 2002 Bantam Workshop Manual page 1356

BACK TO CHAPTER INDEX
417-01-35
DIAGNOSIS AND TESTING (CONTINUED)
K8: CHECK THE CIRCU
1.
K9: CHECK THE CIRCUIT FOR RIGHT-HAND TURN SIGNAL FOR OPEN
1.
E9426 EN
CONDITIONS
IT FOR LEFT-HAND TURN SIGNAL FOR OPEN
2.
Multifunction switch Rear turn signal
C15a lamp, left-hand side
2.
Multifunction switch Rear turn signal
C15a lamp, right-hand
side C66
Exterior Lighting
DETAILS/RESULTS/ACTIONS
2 Measure the resistance between relay socket –
turn signal, terminal 49A and multifunction
switch, connector C15a, pin 5, circuit 49-LG1
(BU), component side.
• Is the resistance less than 2 ohms?
Yes
INSTALL a new relay – turn signal. TEST
the system for normal operation.
No
INSTALL a new multifunction switch. TEST
the system for normal operation.
3.
C68
4 Measure the resistance between multifunction
switch, connector C15a, pin 5, circuit 49-LG1
(BU), harness side and rear turn signal lamp,
left-hand side, connector C68, circuit 14S-
LG12 (BU), harness side.
• Is the resistance less than 2 ohms?
Yes
CHECK the multifunction switch, according
to Component Testing attached to the wiring
diagrams. If necessary INSTALL a new one.
TEST the system for normal operation.
No
REPAIR the open circuit(s) between multi-
function switch and splice S36, by using the
wiring diagrams. TEST the system for nor-
mal operation.
3.
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
CONTINUED
07/2001 2002 Bantam
417-01-35