Cylinder Head Installation - Honda 1985 CBX750F Workshop Manual

~HONDA
~
CBX7S0F
CYLINDER HEAD/VALVES
CYLINDER HEAD INSTALLATION
Clean the cylinder surfaces.
Install a new gasket and the dowel pins.
Install the cam chain guide.
Push on the tensioner arm and lock the arm by set ·
ting the lock pin to the lock plate as shown .
(3) DOWEL
PINS
(1)
LOCK PIN
----...
LOCK
PLATE~-- r - - - I
Pull the cam chain guide slightly and push it
rear­
ward, then lower the cylinder head.
Set the cam chain guide properly and set the cylin­
der head.
Apply engine oil to the threads and flanges of the
cylinder head cap nuts.
Tighten the cylinder head cap nuts in the sequence
shown.
TORQUE: 26-30 N·m
(2.6-3.0 kg·m, 19-22 ft-Ib)
@
@
@
®
6-16