HONDA
CBX7S0F
SWITCHES
(1)
FUEL LEVEL SENSOR
FUEL LEVEL SENSOR
REMOVAL
Remove the fuel tank and drain the fuel.
Remove the fuel level sensor attaching nuts and fuel
level sensor.
.",;
','r'
.~'
:~i#&~~it;~)Ki«, ..
. , ' .' :" "':.
·1'·",~.;:
"~~'~~;:::: j~~~~ii::
-.:r..::'
~~~
-.".
INSPECTION
Measure the resistance of the fuel level sensor in the
. .
~
(1) EMPTY
full and empty float positions.
' J
RESISTANCE: FULL 1-5
n
EMPTY 103-117
n
(2)
FULL
Turn the ignition switch ON.
Connect the fuel level sensor coupler to the wire
harness. Move the float to full and empty and check
the fuel gauge needle in both positions. If the fuel
gauge does not indicate the proper level, replace it
with a new one.
(2) FULL
19-6