HONDA
CBX7S0F
CYLINDER HEAD/VALVES
(1)
TENSIONER BODY
(2)
CLIPS
Remove the clips and pins from the tensioner.
NOTE:
Use care when removing the clips and pins to
prevent them from falling into the crankcase.
Place a piece of wire through the cam chain. Tie it
so the chain does not fall into the crankcase.
Separate the tensioner body and slipper and
remove
them
.
(4)
TENSIONER SLIPPER
Remove the oil pipe bolts and sealing washers.
~!
\,~:
.
,:
,l:.:.,!:.•
c
(2) 01 L PIPE
Remove the front and rear cylinder head mount
bolts.
Remove the oil pipe.
(3)
PINS
(1)
FRONT
REAR
6-9