Right Handlebar Installation - Honda 1985 CBX750F Workshop Manual

HONDA
CBX7S0F
FRONT WHEEL/SUSPENSION/STEERING
----------------------------------------------- --. . . .
Disconnect the choke cable from the choke lever.
Remove the retainer ring, loosen the pinch bolt and
remove the left handlebar from the fork tube.
RIGHT HANDLEBAR INSTALLATION
Apply grease to the throttle grip sliding surface and
slide the throttle grip over the right handlebar.
(2) CHOKE CABLE
-~
(ll
(2 )
RETAINER RING
Install the right handlebar onto the fork tube and
on the top bridge, aligning the pin on the bottom
of the handlebar with the slit of the top bridge.
Put the pin of the handlebar to the rear surface of
the slit and tighten the handlebar pinch bolt.
TORQUE: 35-45 N·m
(3.5-4.5 kg-m, 25-33 ft·lb)
Install the handlebar retainer ring.
Install the handle weight and attaching screw to the
handlebar.
Hold the weight with pliers and shop towel, and
tighten the attaching screw.
(3) PINCH SOL T
13-9