Table of Contents
Advertisement
HONDA
CBX7S0F
MAINTENANCE
BRAKE PAD WEAR
Check the brake pads for wear.
Replace the brake pads if the wear line on the pads
reaches the edge of the brake disc (page
15·5).
CAUTION
Always replace the brake pads in pairs
to
as
sure even disc
pressure.
BRAKE SYSTEM
I nspect the brake hoses and fittings for
deteriora
t
ion,
cracks and signs of leakage. Tighten any loose
fittings.
Replace hoses and fittings as required.
(2) WEAR LINE
(3)
BRAKE
DISC
(1) BRAKE LIGHT SWITCH
(2)
ADJUSTING NUT
BRAKE LIGHT SWITCH
Adjust the brake light switch so that the brake light
will come on when the brake engagement begins.
Adjust by holding the switch body and turning the
.
adjusting nut. Do not turn the switch body
.
.
Turn the adjusting nut clockwise if the brake light
comes on to late.
(1)
VERTICAL ADJUSTING SCREWS
HEADLIGHT AIM
NOTE:
• Adjust the headlight beam as specified by
local laws and
regulations.
• Adjust the right and left headlights individ
ually.
!
\
Adjust vertically by turning the vertical adjusting
screw.
Adjust horizontally by turning the horizontal ad
justing screw.
An improperly adjusted headlight may blind
oncoming drivers, or it may fail to light the
road for a safe distance.
(2) HORIZONTAL ADJUSTING SCREWS
3-12
Advertisement
Table of Contents
Troubleshooting
