HONDA
CBX7S0F
FRONT WHEEL/SUSPENSION/STEERING
Pry open the retainer.
Turn the ignition key so it is partway between the
ON and OFF detent positions.
Push the lugs that are locked in the slots. then pull
the contact base from the switch.
NOTE:
On G and ND models, if the ignition switch
lock cylinder must
be
replaced, remove the
shear bolts that are attaching the cylinder to
the top bridge, using the drill. Install a new
cylinder and tighten the shear bolts until the
bolt head twists off.
Install the contact base and top bridge in the reverse
order of removal.
TORQUE:
STEERING STEM NUT:
90-120 N·m (9.0-12.0 kg·m. 65-87 ft-lb)
STEERING STEM PINCH BOLT:
20-30 N·m (2.0-3.0 kg·m, 17-20 ft-lb)
FORK TOP PINCH BOLTS:
9-15 N'm (0.9-1.5 kg·m, 7-11 ft-lb)
HANDLEBAR PINCH BOLTS:
35-45 N·m (3.5-4.5 kg-m, 25-33 ft-Ib)
(1)
RETAINER
(1)
SLOTS
(2) LUGS
13-39