~HONDA
~
CBX750F
FRONT WHEEL/SUSPENSION/STEERING
FORK TUBE/FORK SLIDER/PISTON
Check the fork tube, fork slider and piston for score
marks, scratches, or excessive or abnormal wear
.
Replace any components which are worn or darn
aged.
Check the fork piston ring for wear or damage.
Check the rebound spring for fatigue or damage.
(5)
FORK TUBE
Set the fo
rk
tube in V blocks and check its
runout.
SERVICE LIMIT
:
0.20 mm (0.008 in)
BUSHING/BACK-UP RING
Visually inspect the slider and fork tube bushings.
Replace the bushings if there is excessive scoring or
scratching, or if the teflon is worn so that the cop
per surface appears on more than 3/4 of the entire
surface.
Check the back-up
ring;
replace it if there is any
distortion at the points shown.
(1) BUSHING
(2) BACK-UP RING
"
(3) CHECKPOINTS
<,
-+--~
(4) COPPE R
SURFACES
13-24