Table of Contents
Advertisement
HONDA
CBX750F
1. GENERAL INFORMATION
~
GENERAL SAFETY
1-1
TORQUE VALUES
1-4
SERVICE RULES
1-1
TOOLS
1-6
SPECI FICATIONS
1-2
CABLE
&
HARNESS ROUTING
1-8
GENERAL SAFETY
l?b·\;WW
r@·l;iiiii!~
.
If the engine must be running to do some work,
The battery electrolyte contains sulfuric acid. Pro
make sure the area is
well-ventilated.
Never run the
tect your eyes, skin and clothing. In case of contact,
engine in a closed area. The exhaust contains poi
flush thoroughly with water and call a doctor if
sonous carbon monoxide gas.
electrolyte gets in your
eyes.
(%Wl;iii@)
DmIl3
Gasoline is extremely flammable and is explosive
The battery generates hydrogen gas which can be
under certain conditions. Do not smoke or allow
highly explosive. Do not smoke or allow flames or
flames or sparks in your working area.
sparks near the battery, especially while charging it.
SERVICE RULES
1. Use genuine HONDA or HONDA-recommended parts and lubricants or their equivalents. Parts that do not meet HONDA's
design
specifications
may damage the motorcycle
.
2
.
Use the special tools des
igned
for th
is
product.
3. Use only metric tools when servicing this motorcycle. Metric bolts, nuts, and screws
'
are not interchangeable with Engl ish
fasteners. The use of incorrect tools and fasteners may damage the motorcycle.
4. Install new gaskets, a-rings, cotter pins, lock plates, etc. when reassembling.
5. When tightening bolts or
nuts,
begin with the larger-d
iameter
or inner bolts first, and tighten to the specif
ied
torque dia
gonally, unless a particular sequence is specified.
6. Clean parts in cleaning solvent upon disassembly
.
Lubricate any slid
ing
surfaces before reassembly
_
7. After reassembly, check all parts for proper installation and operation.
1-1
Advertisement
Table of Contents
Troubleshooting
