Honda 1985 CBX750F Workshop Manual page 96

HONDA
CBX750F
CYLINDER HEAD/VALVES
Install the two a-rings and dowel pins into the oil
passage holes.
Install the eight dowel pins into the camshaft holder
bolt holes .
(1) "IN" LINES (2) ··EX " LINES
Install each camshaft holder on its original location.
NOTE:
The marks on the camshaft holders mean:
IN
A:
Intake right .. _ .. .
IN L: Intake left
EX R: Exhaust right
EX L: Exhaust left
Temporarily tighten the camshaft holder bolts.
Align the "IN" lines on the intake cam sprocket
and the "EX" Jines on the exhaust cam sprocket
with the top of the cylinder head.
Place the cam chain on the sprockets.
Slide the cam sprockets onto the camshaft flanges.
Fill the de -foaming chambers with clean engine oil.
CAUTION
Do not tum the camshaft before filling the
de-foaming chamber.
6-20