Hydraulic Tappet Installation - Honda 1985 CBX750F Workshop Manual

~HONDA
CYLINDER HEAD/VALVES
~
CBX7S0F
Install and t ighten the cam cha in tensioner mount­
ing bolts.
Instal l the carburetors and exhaust system.
(1) CAM CHAIN TENSIONER MOUNTING
BOLTS
HYDRAULIC TAPPET
INSTALLATION
Place the tappet in a jar filled with kerosene .
.Place the tappet bleeder into the tappet. .
Hold the tappet upright and pump the tappet until
air bubbles stop coming out Remove the tool. and
try to quickly compress the tappet by hand. You
should not be able to compress it more than 0.2 mm
(0.008 in).
Remove the tappet from the fluid keeping it up'
right .
Fill the all tappet hole up with clean engine oil.
Install the bled hydraul ic tappets as described above
procedure.
Install the dowel pins into the cylinder head.
I S~OL
I
(1) HYDRAULIC TAPPET BLEEDER
07973-M E90000
(2)
KEROSENE
(3) HYDRAULIC TAPPET
6-18