Left Handlebar Installation - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
FRONT WHEEL/SUSPENSION/STEER ING
Install the right handlebar sw itch housing, aligning
the locating tab of the housing with the hole in the
handlebar .
Tighten the forward screw first, then tighten the
rear screw.
(11 LO CAT IN G TAB
( 1)
FRO NT BR AKE MAS TER CY LI N D E R (2) "UP " MARK
Place the front brake master cylinder on the handle
bar and install the master cylinder holder with the
"UP" mark facing up.
Align the index mark on the holder with the punch
- mark" on "th ehand lebar. and tighten the upper bol t
first then t ighten the lower bolt.
TORQUE: 10-14 N·m
(1.0-1 .4 kg·m. 7-10 ft-lb]
. Connect the front brake switch wires.
l
(3) I NDEX MAR K (5) HOLDER
LEFT HANDLEBAR INSTALLATION
Install the left handlebar onto the fork tube in the
same manner as right handlebar (page 13·9).
Connect the choke cable to the choke lever.
13-10