~HONDA
~
CBX750F
CRANKSHAFT/STARTER CLUTCR
Install the bearing caps and rods on the
correct
crankpins, and tighten them evenly.
TORQUE: 30-34 N·m
(3.0-3.4 kq-m, 22-25
ft-Ib)
NOTE
:
Do not rotate the crankshaft during inspec
tion
.
-
Remove the caps and measure the compressed
plastigauge
on each crankpin.
OIL CLEARANCE SERVICE LIMIT:
-0.06
mm (0.002 inl
-
-:
\~
.. . . .
IVIAIN BEARINGS
Inspect the bearing inserts for damage or
separation .
Clean all oil from the bearing inserts and journals.
Put a piece of plastigauge on each journal, avoid
ing the oil holes.
12-13