Nuts, Bolts, Fasteners; Wheels Maintenance; Recommended Tires And Pressures - Honda 1985 CBX750F Workshop Manual

HONDA
CBX750F
MAINTENANCE
( 11 AIR VALVE
Remove the frame left side cover.
Remove the valve cap and measure the shock ab­
sorber air pressure.
REAR SHOCK ABSORBER AIR PRESSURE:
0-400 kPa (0-4.0 kg/cm
2
,0-57 psi)
NOTE:
Check the air pressure when the shock absorb­
er iscold.
NUTS, BOLTS, FASTENERS
Check that all chassis nuts and bolts are tightened
to their correct torque values (Section 1) at the
intervals shown in the Maintenance Schedule (page
3-31.
Check all cotter pins , safety clips, hose clamps and
cable stays.
WHEELS
NOTE :
Tire pressure should be checked when tires are
COLD.
Check the tires for cuts, imbedded nails, or other
sharp objects.
RECOMMENDED TIRES AND PRESSURES:
Front Rear
Ti.re size
110/90V16 130/80V18
Cold t ire
pressure
kPa
(kg/em' ,
psi)
Dr iver
only
250 (2.50,36) 250 (2.50.36)
Driver
and one
passenger
250 (2 .50,36) 290 (2 .90.41)
Tire
brand
8RIDGE·
STONE
G511 G510
DUNLOP K527A K527
Check the front and rear wheels for trueness (Sec­
tion 13 and 14).
Measure the tread depth at the center of the tires.
Replace the tires if the tread depth reaches the
following limit:
Minimum tread depth:
Front: 1.5 mm (1/16 in)
Rear: 2.0 mm (3/32 in)
(21 AIR V AL V E CA P
~.
3-15