Ignition Coil Continuity Test - Honda 1985 CBX750F Workshop Manual

HONDA
CBX7S0F
IGNITION SYSTEM
IGNITION COIL
CONTINUITY TEST
Remove the fuel tank and disconnect the ignition
coil wire leads.
Measure the primary coil resistance between the
terminals.
RESISTANCE: 2.4-3.0
n
If the reading does not meet the specification, check
for continuity between the primary terminal and
ground. Replace the coil if there is continuity be­
tween them.
Measure the secondary coil resistance with the spark
plug caps in place.
RESISTANCE: 21-28 kn
If the reading does not fall with in the limit, remove
the ignition coils by removing the bolts.
..
\
Remove the spark plug wires by loosening the wire
retaining nuts.
Measure the secondary coil resistance.
RESISTANCE: 13.6-15.5 kn
17-2