Shock Absorber Removal; Oil Seal Replacement - Honda 1985 CBX750F Workshop Manual

HONDA
CBX7S0F
REAR WHEEL/SUSPENSION
SHOCK ABSORBER
(1) SHO CK LINK -TO-ARM BOLT
REMOVAL
Place the motorcycle on its center stand.
Remove the rear wheel (page 14·3).
Remove the left and right frame side covers.
Free the rear shock damping adjuster cable from its
clamps.
Remove the shock link-to-arm bolt.
Remove the shock absorber lower mounting bolt.
(2) SHOCK ABSORBER LOWER MOUNTING
BOLT
-II'
~
Remove the shock abso rber upper mounting bolt
and remove the shock absorber from the frame be·
ing careful not to damage the damping adjuster
cable and air hose.
OIL SEAL REPLACEMENT
(1)
DAMPlrJ~
ADJUSTER
(2) ADJUSTER CABLE
Remove the cotter pin and washer, and disconnect
the damping adjuster cable from the adjuster .
Remove the cable bracket from the absorber.
(3) CABLE BRACKET
14-9