Sensor (Stapler Bin Full Receive) Removal - Lexmark MX610 Service Manual

Sensor (stapler bin full receive) removal

1
Remove the right cover. See
2
Remove the left cover. See
3
Remove the rear cover. See
4
Remove the stapler service cover. See
5
Disconnect the sensor cable (CN18) from the controller PCBA.
6
Remove the two screws (A) from the top cover.
"Stapler right cover removal" on page
"Stapler left cover removal" on page
"Stapler rear cover removal" on page
"Stapler service cover removal" on page
Repair information
358
336.
336.
343.
347.
7016