Messages; Default Error Messages - Sam4s SPS-500 Series Program Reference Manual

Messages

Various descriptors and messages are set with this program:
Message
Logo Message
Error Messages
System Descriptors
Report Descriptors
Check Endorsement
Message
Guest Check Logo Message
Validation Message
DataTran Message
Pole Display Message

Default Error Messages

NO. DESCRIPTION
1 (NOT USE)
2 (NOT USE)
3 AMOUNT REQUIRED
4 BAD VALUE
5 BUFFER FULL
6 BUFFER EMPTY
7 BUSY
8 BAD COMMAND
9 CASH DECALATION REQUIRED
10 CASH-IN-DRAWER EXCEEDED
11 CHECK# ASSIGNED AUTO
12 CHECK# REQUIRED !
13 CONDIMENT REQUIRED !
14 CRC ERROR
15 DUPLICATE!
16 EAT IN/TAKE OUT/DRV THRU
17 ENTER EMPLOYEE CODE
18 ENTER EMPLOYEE #
19 ENTER GUEST COUNT
20 ENTER SEAT#
21 ENTER TABLE#
SPS-500 Program Manual v1.31
Type of Message and Application
6-line x 40 character Preamble & Postamble. Appears on receipts
30-characters per message. Displays on message line of screen. Default
messages are listed below.
The length of each descriptor varies. For example day of week fields are
3 characters, while other printed messages are 5 characters or more.
Default System Descriptors are listed below.
16-character descriptors for Financial and Employee report totals.
10-line x 40 characters. Prints when check is endorsed on an optional
slip printer.
5-line x 40 character Preamble & Postamble. Prints at top and bottom of
hard or soft checks
3-line x 40 character. Prints when forms are validated on an optional slip
printer.
4-line x 32 character. Prints on electronic payment voucher/receipt.
A 25-character message can scroll left, right, or bounce left to right on an
optional pole display.
NO. DESCRIPTION
22 ENTRY REQUIRED
23 ERROR
24 ERROR JAM
25 TABLE NUMBER IN USE
26 HALO OVER!
27 ILLEGAL KEY SEQUENCE
28 IN USE!
29 INACTIVE!
30 INPUT QTY
31 KITCHEN PRINTER FAILURE
32 MANAGER REQUIRED
33 MANAGER OVERRIDE REQUIRE
34 MEMORY FULL
35 NEGATIVE
36 NO CHECK#
37 NO DATA
38 NO DRAWER!
39 NO MANUAL ENTRY
40 NO PAPER
41 NO PLU!
42 NON ADD# REQUIRED
P Mode Programming  141