Save Reports; Restore Reports - Sam4s SPS-500 Series Program Reference Manual

Save Reports

Reports can be saved to an SD card, USB memory stick or to an FTP site. All reports are saved
simultaneously. Each report is saved in .rpt format. A report viewer utility is available so that the file data is
available to Excel or other PC applications. Reports are stored at the following path:
sps500/backup/store name/REP_mmddyyyy
If the store name is not programmed, the number "xxxxxx" represents the 6-digit numeric store number and
"mmddyyyy" represents the date the reports were saved. Multiple stores and multiple report dates can be
stored on the device.
1. Insert the memory device in the SPS-500.
2. From the S Mode menu touch SRAM Backup and select a backup method, SD, USB or
FTP.
3. From the select store name dialog box, select the name of the store.
4. Touch OPEN. The SRAM BACKUP (SD) dialog box displays.
5. Touch SAVE REPORT TO SD
6. At the Confirmation dialog box, touch YES. The PLEASE WAIT message displays until the
save is complete.

Restore Reports

Previously saved reports can be restored to the memory of the SPS-500. Report saving is advised whenever
service activity or updates are required on installed ECRs. Reports may be able to be restored after upgrade,
refer to the upgrade package for more information.
1. Insert the memory device containing the reports the SPS-500.
2. From the S Mode menu touch SRAM BACKUP and select a backup method, SD, USB or
FTP.
3. From the select store name dialog box, select the name of the store.
4. Touch OPEN. The SRAM BACKUP (SD) dialog box displays.
5. Touch RESTORE REPORT FROM SD.
6. At the selection window, touch the date of the report(s) you wish to restore.
7. Touch OK. The PLEASE WAIT message displays until the upload is complete.
68  S Mode Programming
SPS-500 Program Manual v1.31