6. Confirm the update by touching YES. Monitor the update progress on the screen.
7. The screen displays Update or Backup Complete. Click Close.
If you are completing an application backup, there will be a delay of about 3 minutes before the S-
MODE menu returns and the backup is complete. Do not power off the ECR or attempt another
operation until the S-Mode menu returns. After completion, it is not necessary to clear memory.
If you are completing application update, you must clear all memory. See "Memory All Clear" on
page 23.
8. Verify the Application software version selecting the Version option from the S Mode Self Test
menu. The application version is also displayed on the SPS-500 information screen. (Touch @/For
in REG mode when outside of a transaction.)
SPS-500 Program Manual v1.31
Software Installation & SD Utilities 31