Table of Contents
Advertisement
Messages
Preamble
The preamble is a programmable message of up to six lines (up to 32 characters per line) that appears
at the top of each receipt. Note that double wide character count as two characters.
Sam4s ER-260EJ/256EJ OP Manual v1.20
1. Move the key to the P lock position to display the Program Mode menu.
2. With the first option, "PLU" displayed, use the CHARGE1 and the CHARGE2
keys to select "8.MESSAGES" (or press 8 to go to the option directly.) Press CASH
to view the Message programming menu screen.
MESSAGES
1.PREAMBLE
3. Use the CHARGE1 and the CHARGE2 keys to scroll up and down through the
MESSAGES menu. Or, if you already know the menu number of the message you
wish to program, you can enter the digit (1-5) directly. There are 5 options:
1.PREAMBLE
2.POSTAMBLE
3.ENDORSEMEN T
4.FINANCIAL RPT
5.CLERK RPT
4. Press CASH to select the message you wish to set.
1. From the MESSAGES screen, select PREAMBLE or press 1. Press CASH to
display the PREAMBLE screen. There are 6 lines of message:
1.NO DATA
2.NO DATA
3.NO DATA
4.NO DATA
5.NO DATA
6.NO DATA
2. Use the CHARGE1 and the CHARGE2 keys to select the message line you wish
to program and press the CASH key.
3. Type the new message (up to 32 characters) using the overlay (or enter codes if code
method selected in system options). Press CASH to confirm the new line.
4. Continue to program additional Preamble lines or press CLEAR to return to the
PROGRAM MODE screen.
Program Mode Programming • 163
Advertisement
Table of Contents
