Sam4s SPS-500 Series Program Reference Manual page 107

(41) BASE CURRENCY
Set for local currency.
(42) ALLOW CLERK INTERRUPT
If allowed, a new clerk can be signed on in the middle of a transaction. In this circumstance, the initial
transaction is suspended. When the interrupt transaction is completed, the suspended transaction can be
continued. You must set option #45 in this program, "ALLOW CLERK CHANGE WITHOUT SIGN-
OFF" to YES and set the S Mode System Option, "REG# HOLDS CLERK INTERRUPT DATA" to
activate this feature.
CAUTION: If used, this feature may cause operator confusion. Suspended transactions may appear to
"disappear", when in fact; the original clerk must sign on to recall the suspended transaction.
(43) ALLOW FLOATING CLERK
With 'NO' of this option, the employee must reopen his or her interrupted order on the register which
he/she used before. If you set to YES, employee is allowed to open interrupted order at any register.
(44) ALLOW CLERK CHANGE WITHOUT SIGN-OFF
If YES, new clerk sign on is allowed without previously signing off the current employee. Must be set to
YES if clerk interrupt is implemented.
(45) SKIP IN NOT FOUND PLU REGISTRATION
GROUP LINK #1
DESCRIPTOR
The "Not Found PLU" sequence asks for LINK STATUS and LINK GROUP. Select here if you wish to
bypass these entries.
(46) RECEIPT STATUS ON OPERATOR DISPLAY
Choose Yes to display the receipt on/off status on the operator display. Receipt-on displays as "Ron";
receipt-off displays as "ROff".
(47) CARD READER ENABLE
Required for use of employee cards.
(48) ALLOW SALES FOR 0 STOCK ITEMS
If Yes, sale of items with zero stock is allowed.
(49) DATE OF BIRTH ENTRY COMPULSORY
If Yes, date of birth for age verification items must be entered at prompt. Operator may press escape to
sell items when set to N.
(50) CHECK DIGIT IS SENT FROM BCR
Setting needs to match your scanner setting. If scanner is set to read check digit, this option must be Yes.
(51) DISPLAY POPUP ON DESTINATION CHANGE
If YES, a pop-up window will display when a destination key (EAT-IN, TAKE OUT, DRIVE THRU) is
pressed.
SPS-500 Program Manual v1.31
P Mode Programming  107