Plu Add & Change - Sam4s SPS-500 Series Program Reference Manual

PLU Add & Change
1. From the P mode menu touch PLU to view the PLU program selection window.
2. Touch PLU ADD & CHANGE to view the SELECT PLU screen.
3. You can edit existing PLUs:
Touch a PLU key located on the MAIN SCREEN, or touch PAGE UP/PAGE DOWN until the
appropriate Key Link where you wish to edit a PLU displays.
Press a PLU key on the main keyboard.
Enter the PLU number and touch OK.
You can add new PLUs in one of two ways:
New PLUs that are to be located the MAIN SCREEN or a Key Link or the keyboard must first be
assigned to a key location in S mode. Once a new PLU is assigned to the keyboard or to a screen,
touch the key to add the PLU descriptor and options.
PLUs can be randomly added by entering a PLU number and touching OK, or by scanning an item if
a scanner is connected.
SPS-500 Program Manual v1.31
P Mode Programming  73