Key Relocation Screen-Design Tab; Key Relocation Screen-List Tab; Function Key Code List - Sam4s SPS-500 Series Program Reference Manual

Key Relocation Screen—Design Tab
Key Relocation Screen—List Tab
SPS-500 Program Manual v1.31
Select one of 4 font
sizes
Select black or
white font color.
Select button color.
Touch here to select a button
size/type. Inactive buttons ("X")
do not display in REG mode.
Touch auto select to automatically go
to the next key after each program
t
Touch multi check if you wish to assign the same attributes to a
group of locations at the same time. Touch as many positions as
you wish and then make your selection.
Use the list tab to select the
function of the selected key
location:




Touch the FUNCTON tab
and then select the function
from the list, or
Touch the MACRO tab to
assign a macro to the
location, or
Touch the PLU tab to assign
a PLU to the location, or
Touch the KEY LINK tab to
select a keylink to open
when this key is touched.
S Mode Programming  47