Sam4s SPS-500 Series Program Reference Manual page 52

CURSOR DOWN
CURSOR UP
DESTINATION 1-10
MACRO PAUSE
MACRO SET
MACRO #
MDSE RETURN
MISC TEND 1-16
MISC TEND #
MODIFIER 1-10
#/NO SALE
P/BAL
52  S Mode Programming
Reserved
080-
089
091 Use in REG Mode to cursor up to an item displayed in the transaction
area of the screen.
092 Use in REG Mode to cursor up to an item displayed in the transaction
area of the screen.
099- Reserved
100
101- DESTINATION functions are subtotal functions to be used for selling
110 situations such as eat in, take out and drive thru. Touch the appropriate
DESTINATION key to record the amount of the transaction in the
destination key total on the financial report. Tax calculation can be
changed to accommodate different tax rules for drive thru sales.
111- Reserved
114
115 Press the MACRO PAUSE key during macro programming to indicate
a pause in the macro. A macro will stop when it reaches the pause, and
then accept an operator key entry before continuing the macro sequence.
116 Press the MACRO SET key to create a macro at any time without
going through the P-mode macro program.
Use to execute one of the forty possible macros by entering the macro
117
number and touching the MACRO # key.
118 Touch the MDSE RETURN key to adjust items inside or outside of a
transaction.
119- Touch a MISC TEND key to finalize or tender sales paid by various
134 charges or other media. Tendering may or may not be allowed
depending upon function key programming. (Charge is the default
descriptor for MISC TEND #1)
135 Access any of the 16 possible miscellaneous tender functions by
entering the tender number (1-16) and touching the MISC TEND #
key.
136- Preceding a PLU entry, a modifier key changes a digit of the PLU
number, causing a different PLU to be registered. Modifier keys can be
145
set to change any of the 14 PLU digit positions to any specified digit (0-
9).
147 Use to enter a non-adding memo number during a transaction (#
function) or use to open the cash drawer outside of a sale (no sale
function). Beginning at version 1.00s (Sept 12, 2013) capability to scan
a non-add number was added.
148 Enter an amount, and then touch the Manual Previous Balance (P/BAL)
key to use the simplest form of Charge Posting/Table Service. The
P/BAL key may be used any time within a transaction. Transactions
where the P/BAL key is used must be finalized with one of the STORE
CHECK keys.
SPS-500 Program Manual v1.31