Sam4s SPS-500 Series Program Reference Manual page 59

USE NEW IRC NETWORK (Version 1.00s or later)
This option allows you to use a non-standard IP address configuration.
PC CONNECTION TYPE
Select SERIAL or ETHERNET.
PC CONNECTION PORT NUMBER
The port number.
(20) USE MAGNETIC DALLAS KEY
Set to NO. This option is not currently available.
(21) DRAWER OPEN COUNT (1-5)
Default is 1. This is the number of drawer open pulses sent to the drawer. This option only if you are
experiencing intermittent cash drawer opening failure.
(22) DRAWER OPEN DELAY
Default is 100. This is the time delay between pulses, if multiple pulses are set on option #23. Set this
option only if you are experiencing intermittent cash drawer opening failure.
(23) DRAWER OPEN TIME
Default is 200. This is the length of the drawer pulse. Set this option only if you are experiencing
intermittent cash drawer opening failure.
(24) STRONG PASSWORD
If Yes, requires sign –in code and MCR sign on. Required for integrated payment installations.
(25) SAVE EFT LOG FILE TO (option changed at version 1.00q)
Choose NONE, SD or USB. Always set to NONE. Do not use unless instructed to use by CRS support.
(26) SAVE PABP LOG FILE TO (option changed at version 1.00q)
Choose NONE, SD or USB. Must be set on all ECRs in the system if using integrated electronic
payments. Select the memory device (SD or USB) that is being used to collect the PABP log file.
(27) SALES AREA CONFIGURATION
Choose one of the following screen layout options (see examples below each option):
NOT USE (default) provides screen layout consisting of a transaction area and 24 touch locations.
SPS-500 Program Manual v1.31
S Mode Programming  59