Function Key - Sam4s SPS-500 Series Program Reference Manual

Function Key

Function key options vary by key. A "Function Key Program Summary" on the following page lists each
function and its options.
Note: Although each 12 character function key descriptor is set here, if a function key appears on the
financial or employee report, the descriptor that prints on the report may be set separately. See "Messages"
on page 141 to set descriptors on the financial or employee report. See" on page 120 to determine which
descriptors are used on reports.
1. Functions are on separate lists: Functions, Macros, and Key links. Select FUNCTION KEY from
the PGM Mode menu and then select FUNCTION, MACRO or KEY LINK. The SELECT
FUNCTION KEY Screen is shown here:
2. Select a function to program:
Enter the function key code and touch OK,
Or, use the PAGE UP/PAGE DOWN keys to view and touch the function key you wish to program.
The programming option screen for the function will display.
3. Refer to "Function Key Programming Notes" on page 100 if you need assistance with specific
options.
94  P Mode Programming
SPS-500 Program Manual v1.31