Sram Backup; Save End User Program - Sam4s SPS-500 Series Program Reference Manual

SRAM Backup

Use this function to load or save an end user programs or report data to or from an SD memory card, USB
memory stick or FTP site.

Save End User Program

1. From the S Mode menu touch SRAM Backup.
2. Depending upon the method you will select, insert an SD card in the SPS-500; or insert a USB
memory device, or connect the SPS-500 to the FTP site via a router and internet connection, then
touch the appropriate button to display the select store name field dialog box.
The current store name (or
number if no store name is
programmed) is displayed here.
Saved stores available on the
memory device (SD card in this
example) listed here.
3. If you are saving a store's program for the first time, touch the button with the current store's name
and then touch OPEN.
If you are saving a new version of a program that has already been stored, touch the store name on the
list to select it, and then touch OPEN.
66  S Mode Programming
SPS-500 Program Manual v1.31