Sam4s SPS-500 Series Program Reference Manual page 115

(2) ENABLE SORT KP BY KP GROUP #
Use this option to create "priority print". For example, if you wish to group appetizers at the beginning of
the chit, then entrees next, place appetizers in a kitchen printer group (see "PLU Status Group" on page
77) with a lower numeric value than the value of the group to which entrees are reported.
(3) # LINE FEED AT BEGIN OF KP PRINT
Enter the number of lines you wish to feed before beginning kitchen printer print.
(4) # LINE FEED AT END OF KP PRINT
Enter the number of lines you wish to feed after beginning kitchen printer print.
(5) COMBINE LIKE ITEMS ON KP OR KVS
If Yes, for example, if two hamburgers are entered and sent to the printer, they will print as "2
HAMBURGERS", rather than
"1 HAMBURGER" and "1 HAMBURGER" on a second line. If condiments are entered, they will be
separated and printed below the items.
(6) SEND ORDER TO KP AT SUBTOTAL
Choose Yes if you wish to print when the subtotal key is pressed, instead of when the sale is finalized.
(7) SEND ORDER TO KVS ON SUBTOTAL
Choose Yes if you wish to send items to the KVS when the subtotal key is pressed, instead of when the
sale is finalized.
(8) PRINT VOIDED ORDERS AT KP OR KVS
If No, then transaction void orders will not print or display at the appropriate printer/screen.
(9) KP IS: REAL TIME/ BATCH
Real time means that each item will print at the printer when the next item is entered (one item delay).
Batch means that the entire order will print when the order is finalized.
(10) KVS IS: REAL TIME / BATCH
Real time means that each item will display at the screen when the next item is entered (one item delay).
Batch means that the entire order will display when the order is finalized.
(11) USE KP ROUTER
Choose from "THE SAME FOR ALL REG" if all registers in the IRC system use the same kitchen
printer routing or "REGISTER SEPARATELY" if different registers have different routing. See "Printer
& KV Routing" on page 150.
(12) KP ORDER#
Choose from "COMBINATION OF REG#&CONS#" or "GLOBAL ORDER#".
(13) DISPLAY KP TIME PERIOD#
You can program four different KP routings by time period (See "Printer & KV Routing" on page 150).
If Yes, the operator display will which of KP routing periods is active in the lower left portion of the
display.
(14) DISPLAY KP ORDER #
Choose Yes if you wish to display the order # in the lower left portion of the operator screen when the
order is finalized.
SPS-500 Program Manual v1.31
P Mode Programming  115