Sam4s SPS-500 Series Program Reference Manual page 63

CUTTING AFTER PRINTING
When a printer has the capabilities of auto cut, this option will decide if that feature is to be used. For
receipts it is commonly set to yes, however detail journal printers do not require this option.
IN CASE OF PRINTER, KICK THE DRAWER
Use to send an audible beep using an optional beeper.
PRINT UPSIDE DOWN
The printer will print the receipt upside down so that if the printer is wall-mounted, or placed vertically,
the user can read easily. Supported printers are: SAM4s Ellix 10, Ellix 20, Bixolon SRP-350, Epson
TM-T88-2. If the number of lines to print in one print job exceeds 1000, the SPS-500 will ignore the
option.
DEVICE
This is the peripheral that will be connected to the port. The following options can be chosen:
DISABLE
The port is not active
PRINTER
The port will be used to operate a printer, you are then presented with a list of Printer types, all of
which are pre-programmed with Driver setting.
VIDEO
This is a linked Kitchen Video System for the display of products.
POLLING
This is the on-line computer link.
SCALE
This links to an approved scale for weighted items. The "OZ Scale" setting supports the Avery Berkel
6712 POS scale, and the POS30/POS60 scales which are capable of weighing in ounces (rather than
pounds). NOTE: If weighing by ounces, the price per ounce must be preset in the PLU price. The
scale will weigh in ounces and compute the correct price per ounce.
SCANNER
This option enables a barcode scanner.
EFT TERMINAL
This option links a DataTran integrated payment device.
CHANGER
This option allows a coin changer to be connected.
POLE DISPLAY
This option allows a pole display to be connected.
LIQUOR
This option allows a liquor dispenser to be connected.
PDC
The option enables a peripheral device controller.
RF UNIT
Setting the RF UNIT option makes the register send data to the serial port in short spurts to make sure the
buffer does not fill up on the receiving device. Use this setting with the Bixolon SRP-270 impact printer
or when wireless RS-232C adaptors are installed.
SPS-500 Program Manual v1.31
S Mode Programming  63