Restore End User Program - Sam4s SPS-500 Series Program Reference Manual

4. The SRAM BACKUP (SD) dialog box displays.
5. Touch BACKUP PGM TO SD to begin the backup.
NOTE: This action will backup the SPS-500 end user program in the path: SPS500/backup/store
name (or store number if the store name is not programmed.) When you restore programs, SPS-500
will look for program data for the store name/number set in system options. If you had previously
saved a program for the same store on the same device, the backup function will write over your
previous end user program. Be sure to archive previously saved programs to your PC.
6. At the Confirmation dialog box, touch YES. The PLEASE WAIT message displays until the
download is complete.

Restore End User Program

1. Insert the memory device containing the program in the SPS-500.
2. From the S Mode menu touch SRAM Backup.
3. From the select store name dialog box, select the name of the store you wish to restore.
4. Touch OPEN. The SRAM BACKUP (SD) dialog box displays.
5. You must first restore the program's memory allocation.
Touch LOAD MEMORY ALLOCATION FROM SD.
6. At the Confirmation dialog box, touch YES. The PLEASE WAIT message displays until the upload
is complete.
7. From the SRAM BACKUP (SD) dialog box touch RESTORE PGM FROM SD.
8. From the selection dialog, select the individual program you with to restore or select "All" to restore
all programs.
9. At the Confirmation dialog box, touch YES. The PLEASE WAIT message displays until the upload
is complete.
SPS-500 Program Manual v1.31
S Mode Programming  67