Time Keeping Option Definitions - Sam4s SPS-500 Series Program Reference Manual

(15) ALLOW Z STOCK REPORT
If Yes, resetting the Stock report is allowed.
(16) ALLOW Z1 TIME KEEPING REPORT
WHEN EMPLOYEES ARE CLOCKED IN
If Yes, the time keeping report can be run when employees are clocked in.
(17) AVG. GST ON FIN IS FROM GST
If No, the AVG/GST (average sale per guest or customer) is calculated from customer count, if Yes, is
calculated from guest count from GUEST key use.
(18) ALLOW Z WITH OPEN CLERKS
If Yes, Z reports are allowed with interrupted orders when clerk interrupt is used.
(19) MAKE IRC REPORT IN DEFAULT?
When Yes, any report taken will be automatically an IRC report. All registers in the range identified in S
Mode options will be included.
(20) MGR REQUIRED FOR IRC SETTING?
When Yes, the manager password must be entered to change IRC report settings.
(21) CLEAR GLOBAL ORDER# AFTER Z1 FINAN?
If Yes, the global order number counter will reset to zero after a Z1 Financial report.
(22) EXCLUDE TAX ON TIME PERIOD REPORT?
The Time period report feeds the totals for the SALES & LABOR % report. This options allows the
totals to be without tax.
(23) PLU COST PRICE LEVEL (0-20)
If you wish to report PLU cost, profit, and profit ratio, select the PLU Price Level where the PLU cost
will be entered
(24) ENABLE INVENTORY REPORTING WITHOUT ACTUAL INVENTORY INPUT
If YES, the SPS-500 will use the theoretical values as actual inventory if inventory is not activated
through the EDIT INVENTORY ITEM function of X-mode.
(25) USE MANUAL SHIFT CHANGE
If YES, the SHIFT CHANGE function key (keycode #80) can be used to manually change the shift by
entering the numeral representing the shift and touching the SHIFT CHANGE key. (v1.00q or later)
(26) DEFAULT SHIFT LEVEL (1-4)
Set the default shift level.
(27) ALL REG# ARE SELECTED IN DEFAULT
New option at version 1.00s. Set to Yes to allow string reports.

Time Keeping Option Definitions

(1) OVERTIME HOUR IS USED FOR
Select Day or Week for overtime hours.
(2) HOURS PER OVERTIME STARTS
Enter the number of hours that must be worked per day or week before overtime starts. For example, if
field #1 is day, enter 8 hours, or if field #1 is week, enter 40 hours.
SPS-500 Program Manual v1.31
P Mode Programming  123