Standard Connectivity; Software - Sam4s SPS-500 Series Program Reference Manual

Standard Connectivity

Each SPS-500 ECR is configured with:

Four powered (5v out) serial ports: COM#1/2 (DSUB); COM#3/4 (RJ45)

LAN: 10/100 Base-T Ethernet (TCP/IP, 32 ECR)
 SD Card Port: Supports Program Save/Load; Screen Capture; Firmware Updates; Upload Graphics
 Two USB Ports: 1-front/1-back panel
 Three Cash Drawer ports: Default #1/RJ-45 #2 & #3
Optional Connectivity
 MSR (Magnetic Stripe Reader): Track 1&2
 6MB Compact Flash Memory Expansion

Software

The built-in SPS-500 POS application has considerable flexibility and can be configured for both retail sales
and food sales in quick and table service environments.
The SPS-500 application program allows the reseller to configure the terminal to perform in a specific setting.
After consulting with the merchant, the reseller uses S Mode (secure) programs set to memory allocation,
system configurations, key functions and locations, port assignments, passwords and other system settings.
Then the P Mode (program) is used to complete the end user program for the merchant with, price look-up
(PLU) programs, messages, employees, taxes, and other system options.
SPS-500 Program Manual v1.31
Introduction  11