Key Relocation Screen-Pgm Tab - Sam4s SPS-500 Series Program Reference Manual

Key Relocation Screen—PGM Tab
Touch the PGM button to display the keylink options. Select the keylink (screen) you wish to

program. Note that options are not available for the main screen (keylink #0), you must select
keylink #001 to #200 to set options.
Touch the
location you wish
to program. A
border will
display on the
selected location.
Touch multi check if
you wish to assign the
same attributes to a
group of locations at
the same time. Touch
as many positions as
you wish and then
make your selection.
46  S Mode Programming
To apply the key attributes to the
same position is other keylink
screens, touch the KEY button. You
will be prompted to enter the range
of keylinks where you would like
this key applied.
In a similar manner, you can assign
the same key shape and color to the
same position on other keylinks.
Touch
The DISPLAY BACKGROUND
Copy to
IMAGE option -- you must also
copy the
download the image. See "Image
keys on this
Downloads" on page 33.
screen to a
range of
other
Touch KEY to assign a function, PLU or
keylink to a selected location. (Key
assignment can also be done at the LIST
tab.
The keylink set here will display after
entries for the initial keylink are satisfied
or the keylink is exited.
The keylink set here will display after
entries for the initial keylink are satisfied
or the keylink is exited.
The value entered in the "number of
choice" field will determine the
number of entries before the keylink
is automatically closed. For
example, if "2" is set here, after 2
entries, the keylink will
automatically close.
• If the DONE key is enabled and
you set "0" here, unlimited keylink
entries will be accepted. When the
DONE key is pressed, the previous
keylink will display.
• If the DONE key is enabled and
you wish to advance to the keylink
set in the "FUNCTION LIST KEY
LINK" field, set the "NUMBER OF
CHOICE:" field to a value of "99".
If YES, the keylink will ask for
the quantity of items.
SPS-500 Program Manual v1.31