Appendix
Report Function Key Report Code Structure
You can print out reports from the REG position using the REPORT function key. Reports are generated by
first entering the report code, then touching the REPORT key, i.e:
[Report Code] [REPORT]
The REPORT key code is #36.
Report Code Structure
010100
1. Enter the 2-digit report number. See the "Report Table" below.
2. Enter "0" for X reports; enter "1" for Z reports
3. Enter the report level: "1" through "5"
4. Enter "0" for standalone reports: enter "1" for IRC reports, (or "2' to view
5. Enter the option code, 1-4 digits. See the "Report Option Table" below. If
The report code example above "010100" generates an X1 Standalone Financial Report.
Report # Table
NO.
REPORT NAME
01
Financial
02
Sales by Time Period
03
All PLUs
04
From/To PLU (available version 1.00s or later)
05
PLUs by Group
06
PLUs by Group for Selected Group
SPS-500 Program Manual v1.31
IRC for all registers without entering the IRC range).
no option is selected, enter "0".
X/Z & REPORT LEVEL
X1 & Z1 also X5 to Z5
X1 & Z1 also X5 to Z5
X1 & Z1 also X5 to Z5
X1 & Z1 also X5 to Z5
X1 & Z1 also X5 to Z5
X1 & Z1 also X5 to Z5
IRC
INDIVIDUAL & IRC
INDIVIDUAL & IRC
INDIVIDUAL & IRC
INDIVIDUAL & IRC
INDIVIDUAL & IRC
INDIVIDUAL & IRC
Appendix 167