Sam4s SPS-500 Series Program Reference Manual page 119

(30) COPY OF EFT RECEIPT
Indicate the number of copies of the credit card transaction receipt to be printed.
(31) PRINT TIP ON EFT RECEIPT
If Yes, prints tip line on credit card receipt.
(32) MASK NUMBER ON ALL CREDIT DRAFTS
If Yes, only the last 4-digits of the card number are printed.
(33) NOT PRINT AN ALPHA TEXT MESSAGES ON THE GUEST CHECK/RECEIPT
If Yes, alpha text messages will not print on guest checks or receipts.
(34) PRE LOGO IMAGE# ON RECEIPT
Select one of the loaded bit map images.
(35) POST LOGO IMAGE# ON RECEIPT
Select one of the loaded bit map images.
(36) PRE LOGO Image ON GUEST CHECK
Select one of the loaded bit map images.
(37) POST LOGO Image ON GUEST CHECK
Select one of the loaded bit map images.
(38) PRINT ERROR CORRECT/VOID ON EJ & PRINTER
When set to YES, error corrects and item voids will still be resent on the EJ.
(39) PRINT DELIVERY INFO. ON RECEIPT
If yes, delivery information (name, address, etc., from the customer delivery record) will print on the
receipt.
(40) RESET PREVIOUS ITEM COUNTER FOR RECALL
If yes, the guest check item counter will reset upon check recall, the counter will only accumulate the total
of items at each posting.
(41) PRINT PROMTION AFTER TRIGGER PLU
(42) ENABLE BARCODE PRINTING
(43) NO SIGNATURE SLIP IF TRANSACTION TOTAL IS LESS THAN
When the MISC TEND transaction is less than XX.XX the merchant copy of the EFT transaction will not
print the signature line.
SPS-500 Program Manual v1.31
P Mode Programming  119