Sip Commands; Phn-Autoanswer; Phn-Call; Phn-Incoming - AMX NXD-1000Vi Operation/Reference Manual

Programming

SIP Commands

The following table lists and describes SIP commands that are generated from the touch panel.
SIP Commands
^PHN-AUTOANSWER Provides the state of the auto-answer feature.

^PHN-CALL

^PHN-INCOMING

^PHN-LINESTATE

186
Syntax:
"'^PHN-AUTOANSWER, <state>'"
Variable:
state = 0 or 1 (off or on)
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
Provides call progress notification for a call.
Syntax:
"'^PHN-CALL, <status>, <connection id>'"
Variables:
status = CONNECTED, DISCONNECTED, TRYING, RINGING, or HOLD.
connection id = The identifying number of the connection.
Example:
SEND_COMMAND Panel"'^PHN-CALL, CONNECTED, 1'"
Notifies that the call is connected.
Provides incoming call notification and the connection id used for all future com-
mands related to this call.
The connection ID will be 0 or 1.
Syntax:
"'^PHN-INCOMING, <caller number>, <caller name>, <connection id>,
<timestamp>, '"
Variables:
caller number = The phone number of the incoming call.
caller name = The name associated with the caller number.
connection id = The identifying number of the connection.
timestamp = The current time in MM/DD/YY HH:MM:SS format.
Example:
SEND_COMMAND Panel,"'^PHN-INCOMING, 2125551000, AMX, 07/22/08
12:00:00, 1'"
Indicates the current state of each of the available connections used to manage calls.
Syntax:
"'^PHN-LINESTATE, <connection id>, <state>, <connection id>,
<state>,...'"
Variables:
connection ID = The identifying number of the connection.
state = IDLE, HOLD, or CONNECTED
extn = The local extension of this panel (see Example)
Example:
SEND_COMMAND Panel,"'^PHN-LINESTATE, 1, IDLE, 2, CONNECTED, SIP,
<extn>'"
NXD-1000Vi 10" Modero® Wall/Flush Mount Touch Panel with Intercom