Phn-Answer; Phn-Linestate; Phn-Msgwaiting; Phn-Privacy - AMX MVP-7500 Operation/Reference Manual

SIP Commands (Cont.)
^PHN-
LINESTATE
Indicates the
current state of
each of the
available
connections used
to manage calls.
^PHN-
MSGWAITING
Indicates the
number of
messages waiting
the user's voice
mail box.

^PHN-PRIVACY

Indicates the state
of the privacy
feature.

^PHN-REDIAL

Indicates the
panel is redialing
the number.
^PHN-
TRANSFERRED
Indicates a call
has been
transferred.
The following table lists and describes SIP commands that are sent to the touch panel to manage calls.
SIP Commands

^PHN-ANSWER

Answers the call.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Syntax:
"'^PHN-LINESTATE, <connection id>, <state>, <connection id>,
<state>,...'"
Variable:
connection id = The identifying number of the connection.
state = IDLE, HOLD, or CONNECTED
extn = The local extension of this panel (see Example)
Example:
SEND_COMMAND Panel,"'^PHN-LINESTATE, 1, IDLE, 2, CONNECTED, SIP,
<extn>'"
Syntax:
"'^PHN-MSGWAITING, <messages>, <new message count>, <old message
count>, <new urgent message count>, <old urgent message count>'"
Variable:
messages = 0 or 1 (1 indicates new messages)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-MSGWAITING, 1, 1, 2, 1, 0'"
Syntax:
"'^PHN-PRIVACY, <state>'"
Variable:
state = 0 (Disable) or 1 (Enable)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-PRIVACY, 0'"
Syntax:
"'^PHN-REDIAL, <number>'"
Variable:
number = The phone number to dial.
Example:
SEND_COMMAND Panel,"'^PHN-REDIAL, 2125551000'"
Syntax:

"'^PHN-TRANSFERRED'"

Example:
SEND_COMMAND Panel,"'^PHN-TRANSFERRED'"
Syntax:
"'^PHN-ANSWER, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-ANSWER, 1'"
Programming
151